number6 Posted January 5, 2013 Report Share Posted January 5, 2013 (edited) Is there anyone that makes and sells or knows how to make a vice type holder for speedway engines. Think i have seen one before which was two circular plates so you could rotate and its just 1 or 2 bolts to hold engine thanks Edited January 5, 2013 by number6 Quote Link to comment Share on other sites More sharing options...
THE DEAN MACHINE Posted January 5, 2013 Report Share Posted January 5, 2013 Made mine from an old set of flywheels with a little bracket welded on the top Quote Link to comment Share on other sites More sharing options...
number6 Posted January 5, 2013 Author Report Share Posted January 5, 2013 Brilliant thank you shall give that a go. Quote Link to comment Share on other sites More sharing options...
BIKEPIG Posted January 6, 2013 Report Share Posted January 6, 2013 Contact ADAM KIRBY ( via FACEBOOK or he sells engine stands of all types on e-bay) Adam makes the turntable type engine stands. Quote Link to comment Share on other sites More sharing options...
number6 Posted January 6, 2013 Author Report Share Posted January 6, 2013 Thank you. Quote Link to comment Share on other sites More sharing options...
bigend111 Posted January 7, 2013 Report Share Posted January 7, 2013 Adam Kenyon I use a old face plate and fibre plate Adam Kenyon sells then not Kirby , Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.