Jonno Posted May 8, 2012 Report Share Posted May 8, 2012 Purchased a briggo deflector which fitted my bike perfect. The bike had a curved back end and the spindle had plenty of room to allow moving the wheel back and forward as i wanted. I have now changed the back end to a straight one and upon putting the briggo back on i can't move the wheel back far enough. The straight back end is like a V and at this point the briggo spindle wont slot in the gap without moving the wheel right forward resulting in a slack chain? I need to know weather I should grind a bit of the spindle to allow it to fit? I don't really want to shorten the chain if I can help it. What does everyone else do? Advise would be appreciated. Cheers Jon Quote Link to comment Share on other sites More sharing options...
gary o'hare Posted May 8, 2012 Report Share Posted May 8, 2012 I had to re shape mine when I changed back ends. You need to cut a bit off it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.